Dinghy Boomstrut Emergency Response Boat they have been tested on

they have been tested on multiple sites and applications for many years

Width W: 19mm Height: 24mm Width X: 11mm Fastenings Ø: 5mm Fastening centres: 100mm Plunger hole centres: 50mm Weight: 479 g per M

It is the only craft of its type that has actually been used in combat in different theatres and comes through with flying colors

Sheave dia: 30mm Sheave width: 11mm Max rope diameter: 8mm SWL: 280kg Break load: 560Kg Length: 85mm Weight: 93g

Dinghy Boomstrut Emergency Response Boat they have been tested onThe Barton Dinghy Boomstrut is designed for sailboats under 5 metres (17) with boom and sail tip weight of under 6. 8 kgs(16 lbs). We recommend, after reading the instructions fully, that you should install the complete system, then determine if the rods require cutting. This would mean the boom position may not be correct but will allow you to measure the downward force required (with sail flaked) on the aft end of the boom to flex the rods.