014-1064-030 - Follower plate for pumps with shank 30 mm subgroup-Druk regelaars Tevens kan hij gevuld worden

Tevens kan hij gevuld worden met olie om uw oliepomp te smeren bij gebruik en zit er een waterafscheider bij

suitable for the transfer of industrial and chemical fluids

These pumps are advised for the transfer of oil and industrial fluids for medium-long distances

for short medium distances (40 - 50 m)

014-1064-030 - Follower plate for pumps with shank 30 mm subgroup-Druk regelaars Tevens kan hij gevuld wordenIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.