014-1066-045 - Follower plate for industrial pumps with shank 45 mm subgroup-Industriële pneumatische oliepompen 016-1158-000 Manuele vet pomp

016-1158-000 Manuele vet pomp

workshop for industrial vehicles in which is

The operating pressure of the pumps may vary between a minimum of 3 bar and a maximum of 8 bar

It is advisable to use always the follower plate

014-1066-045 - Follower plate for industrial pumps with shank 45 mm subgroup-Industriële pneumatische oliepompen 016-1158-000 Manuele vet pompIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.